Skip to content Inauguração emGrand opening inInauguración en --d --h --m --s · Cadastro VIP ›· VIP sign-up ›· Registro VIP › Abrimos hoje · aguardeWe open today · hold onAbrimos hoy · aguarde Loja aberta! Entrar ›Store open! Enter ›¡Tienda abierta! Entrar ›

Experimental protocol

Tesamorelin

A quick search for popular peptide and other compound protocols. See dosing, duration, side effects and other important guidelines before you start.

This is the text in its original language.

Tesamorelin

Reconstitution

Tesamorelin reconstitutes with standard bacteriostatic water. Add the water slowly down the wall and roll the vial gently between your palms for about 30 seconds until the powder fully dissolves. It foams easily, so never shake it. If a stubborn research lot will not clear with bac water alone, a known community workaround is adding about 0.1 mL of acetic acid first to dissolve it, then topping up with bac water to your target volume. Most vials never need this, so try bac water alone first.

Add bacteriostatic water slowly down the inside wall of the vial.
Roll the vial gently between your palms for about 30 seconds. Do not shake, since it foams readily.
A little foaming on mixing is normal. Let it settle for a minute.
Only if it will not fully dissolve in bac water alone: add about 0.1 mL of acetic acid first, swirl until clear, then add bac water to reach your target volume. Most vials do not need this step.
The finished solution should be clear and colourless before you draw a dose.

New to mixing peptides? Our general beginner’s guide to reconstitution walks through the basics that apply to any vial.

Suggested Protocol

2 mg once daily, injected at night
This is the studied clinical dose for reducing visceral fat
Inject on an empty stomach to work with your overnight GH release
Effects build slowly, so run it for at least 3 months, often longer, before judging results

Dosing Detail

Standard dose is 2 mg once daily at night. Some run 1 mg daily as a lighter approach.
Inject on an empty stomach for the cleanest GH pulse.
Visceral fat reduction is gradual, measured over months, not weeks.
Mild water retention or joint achiness can appear early and usually settles.

Based on 2 mL of bac water.

Want a different syringe type or more detail? Open the full dose calculator.

Duration

Run for at least 3 months given how gradually it works. Many keep it going longer while tracking how they look and feel.

Notes

A GHRH analogue used mainly for reducing visceral fat.
Inject subcutaneously and rotate sites.
Mild water retention or joint achiness can show up early and usually settles.

Storage & Handling

Keep the powdered (lyophilized) vial in a cool, dark place. Refrigerate it for longer-term storage before mixing.
Once reconstituted and properly stored (refrigerated at 2 to 8°C and kept out of direct light), use the vial within 90 days.
Do not freeze a reconstituted vial, and keep it away from heat and sunlight.
If the solution turns cloudy, develops floating particles, or shows any other sign of degradation, stop using that vial.

Informational content for research. This material is educational and intended for laboratory research contexts. It is not medical advice, a prescription, a clinical protocol, or a guarantee of outcome.

← Back to knowledge area